Search results for "Fly ash"
showing 10 items of 53 documents
Unexplored alternative use of calcareous sludge from the paper-pulp industry in green geopolymer construction materials
2020
Abstract Calcareous sludge is an alkaline waste produced by the paper pulp industry that is commonly disposed of in land-fill. However, recent studies and the European regulations discourage such practice. This work investigates an alternative and innovative way to recycle and reuse this waste, as filler, in the production of green geopolymeric mortars intended for applications in construction. This is the first time that this calcareous sludge is used to produce novel waste-based materials, in both construction and geopolymer technology. The novel alkali-activated mortar also uses biomass fly ash – another slightly investigated waste stream – to substitute the metakaolin (70 wt% substituti…
Use of Wood Ash in the Forest and its Effect on the Concentration of Essential and Heavy Metallic Elements in Soil and Blueberries <i>(Vacciniu…
2020
The aim of this research is to evaluate the influence of wood ash as an additive fertilizer to forest soil and growing blueberries (Vaccinium myrtillus L.) in terms of metallic element content. To evaluate the effect of wood ash on the forest ecosystem, was selected two forest areas which was fertilized with a certain amount of wood ash (bottom ash and fly ash). The selected forest areas were divided into two types of sampling plots (fertilized with ash and control). Obtained results showed that in the bottom ash dispersion area the concentration of Ca, K, Ni, Cu is almost twice higher in the fertilized plots than control plots. In the blueberries, metallic element content is similar and do…
Green geopolymeric concrete using grits for applications in construction
2018
Abstract This work investigates the production a green geopolymer-based concrete for a sustainable construction material using biomass wastes from a kraft pulp industry: fly ash (as main alumina-silicate source) and grits (as aggregate). Moreover, a simple, reproducible, ambient temperature, and low-cost manufacture is followed. Mix design aims to maximize wastes incorporation and optimize the mechanical performance. Preliminary tests indicate that the used wastes may be successfully employed to produce green geopolymeric concretes with satisfying mechanical performance (up to 18 MPa), according to the European standards. Furthermore, they represent a viable solution to reduce the environme…
Selective recovery of phosphorus as AlPO4 from silicon-free CFB-derived fly ash leachate
2018
The prospect of phosphorus (P) recovery from siliceous fly ash was investigated. The phosphorus content in the pristine fly ash was 1.21%. Obtaining pure phosphorus products from fly ash is very challenging because of high concentration of other elements, silicon (Si) at 17.3% being the major contaminant. The fly ash was fractionated with sieve size of 125 μm to concentrate the phosphorus in the small-size fraction, which also facilitated the removal of 78% of silica (Si) in the solid phase. The fractionated fly ash was treated with 8 M HCl in order to remove 98% of Si by aging (5 h) of leachate until precipitation of Si-gel, and a phosphorus-rich solution is obtained. Iron (Fe) is also con…
The determination of trace element concentrations in fly ash samples using ultrasound-assisted digestion followed with inductively coupled plasma opt…
2009
Abstract A method of ultrasound-assisted digestion followed by inductively coupled plasma optical emission spectrometry (ICP-OES) used for the determination of trace element (chromium, copper, lead, nickel, vanadium and zinc) concentrations in fly ash samples was developed. All the measurements were performed in robust plasma conditions. Ultrasound-assisted digestion procedures using digestion solutions of aqua regia and hydrofluoric acid (HF) resulted in recovery rates of over 80% for all the analyte elements. Ultrasound-assisted two-step digestion with digestion solutions of 6 mL of HNO3 (Step 1) and 3 mL of HNO3 + 3 mL of HF (Step 2) resulted in recovery rates of over 92% for all the ana…
Control of matrix interferences by multiple linear regression models in the determination of arsenic and lead concentrations in fly ashes by inductiv…
2010
A multiple linear regression technique was used to evaluate and correct the matrix interferences in the determination of As and Pb concentrations in fly ashes by inductively coupled plasma optical emission spectrometry. The direct determination of As and Pb in SRM 1633b by ICP-OES failed to obtain the certified concentrations, except in a couple of cases. However, it proved possible to use the multiple linear regression (MLR) technique to correct the determined concentrations to a satisfactory level. This method of correction is based on the multiple regression line obtained from the analysis of 19 synthetic mixtures of matrix and analyte elements (Al, As, Ca, Fe, Pb, and Si) at five concen…
Combined Adsorption/Photocatalytic dye removal by copper-titania-fly ash composite
2020
Abstract Achieving both photocatalytic efficiency and adsorption capacity is essential to produce a highly efficient photocatalyst. This study fabricated a new photocatalyst by combining copper (Cu) doped titanium dioxide (TiO2) with fly ash (FA). The photocatalysts were synthesized using mild acid (acid-FA/Cu/TiO2), base (base-FA/Cu/TiO2), and deionized water (rFA/Cu/TiO2) activated FA. EDX confirmed the inclusion of Cu in both Cu/TiO2 and FA/Cu/TiO2 composites. XRD analysis indicated the presence of the anatase form of TiO2 after Cu doping and incorporation into modified FA. All three FA/Cu/TiO2 composites demonstrated high absorption (UV and visible region) compared to their TiO2 and Cu/…
The determination of antimony and arsenic concentrations in fly ash by hydride generation inductively coupled plasma optical emission spectrometry
2011
Abstract Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) was used in the determination of As and Sb concentrations in fly ash samples. The effect of sample pre-treatment reagents and measurement parameters used for hydride generation was evaluated. Due to memory effects observed, the appropriate read delay time was adjusted to 60 s resulting in RSDs 0.6% and 2.3% for As and Sb, respectively. The most suitable volumes of pre-reduction reagents for 10 mL of sample were 4 mL of KI/ascorbic acid (5%) and 6 mL of HCl (conc.). The determination of Sb was significantly interfered by HF, but the interference could be eliminated by adding 2 mL of saturated bo…
The coffee-house: Upcycling spent coffee grounds for the production of green geopolymeric architectural energy-saving products
2023
This study investigates a possible alternative reuse of spent coffee grounds (SCG), the major residue of the brewing process, to manufacture green geopolymeric materials for innovative building applications in energy-saving construction, in line with the European Green Deal towards zero-energy building. Specimens were prepared by a combination of biomass fly ash from the Kraft paper-pulp process, as raw material (70 wt%), and SCG (up to 17.5 %), as filler. The high amount of reused bio-wastes makes the material fit the requirements for the Minimum Environmental Criteria (MEC) certification, in light of the Circular Economy (CE) approach. Sustainability is also boosted by the manufacturing p…
Leachate formation and characteristics from gasification and grate incineration bottom ash under landfill conditions
2011
Characteristics and formation of leachates from waste gasification and grate firing bottom ash were studied using continuous field measurements from 112 m(3) lysimeters embedded into landfill body for three years. In addition, the total element concentrations of the fresh ash were analysed and laboratory batch tests were performed to study leachate composition. The three-year continuous flow measurement showed that about one fifth of the leachates were formed, when the flow rate was200 l/d, covering3.5% of the study time. After three years, the liquid/solid-ratio for the quenched grate ash was 1 (l/kg (d.m.)) and for the initially dry gasification ash 0.4 (l/kg (d.m.)). The low initial wate…